Description
(2x) 757 A1P3 Reusable filter – Sold in Pair.
The Climax filter 757-N A1P3 R is designed to be used with the half masks Climax mod. 732, mod. 757 and 820.
Filter A1, against gases and vapours from chemical compounds made up of a high-density polyethylene black base fitted with a round cover made up with the same material.
Filter P3 against particles made up of a high-density polyethylene black base fitted with a round cover made up with the same material.
Between the cover and the base there is a pre-filter with a high absorption capacity against particles.
Bayonet connection system.
Grinding, cutting, drilling of wood, stainless steel, paint, lacquer and corrosion, resistant paint.
Varnishing with solvent-based paint, asbestos removal.
Protection against bacterias and viruses.
Suitable for the retention of particles of welding fumes.
R mark: Reusable filter
Protection Against – See Below:
Type A, Colour Brown: Organic gases and vapours with boiling point> 65 oC
Type A, Colour Brown: Organic gases and vapours with boiling point> 65 oC
Type P, Colour White: Partical Filter
Tests
Continuous inhaled flow resistance:
At 15 I/min: Satisfying
At 47,5 l/min: Satisfying
Filtering effectiveness 99,95% against a;
NaCI aerosol: Satisfying
Paraffin mist: Satisfying
Filter penetration after the clogging test with dolomite dust: Satisfying
Use limitations
This equipment should not be used in the following situations:
· Oxygen-Deficient atmospheres. (less than 19,5%)
· Immediately dangerous to life or health (IDHL)
· Unknown contaminants.
· Unknown concentrations of contaminants
Warnings
Skilled persons who have been adequately trained or who use the belt under the supervision of a competent supervisor may only use the filter 757.
CE Certification
Norms: EN 143:2000+A1:200.
Regulation (UE) 2016/425
Control body number: No0161
